Tag Archives: 12v 20rpm dc gear motor

China high quality 12V 20rpm DC Gear Motor Planetary 36mm Gearbox with Hot selling

Merchandise Description

A. Specification of 12V 20RPM DC Equipment Motor Planetary 36MM Gearbox:

one. Voltage: 12/24V
2. Velocity: 1.2-2000RPM
three. Torque: .2-50Kgf.cm
four. Output Power: 1-5W
5. Gearbox Ratio:  1:3.7 to 1: 3736
six. Gearbox Diameter: 36mm
7. Gearbox Duration: 25.1-fifty.9mm
eight. Motor Duration: 29.1mm
nine. Shaft Diameter: 8mm
ten. Shaft Length: Customized

Note: The data sheet is only for reference, We can make the motor according to your need following Evaluation

How to calculate the motor with gearbox output specs?
1. Output Speed(No-load)=Motor Speed(No-load)/Reduction Ratio
two. Output Torque=Motor Torque*Reduction Ratio*Gearbox Efficiency
 
e.g.: 
PG36GR124500-19.2K
1. Output Speed(No-load)=4500/19.2=234RPM
2. Output Torque=sixty seven.6*19.2*81%=1051.3g.cm≈1kg.cm=.1Nm (Should not be higher than Max. Gear Running Torque)

B. Company Capability

HangZhou CZPT Motor Co. Ltd is a manufacturer and exporter of a variety of of motors with over 10 a long time experience.
Our merchandise ranges contain:
one) DC Brush motor: 6-130mm diameter, .01-1000W output power
two) DC Spur Equipment Motor: 12-110mm diameter, .1-300W output electrical power
three) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power 
four) Brushless DC Motor: 28-110mm, 5-1500W output power 
5) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and guide screw
6) Servo Motor: 42mm to 130mm diameter, 50-4000w 
seven) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 

1. Manufacturing Line:

two. Testing Products:

3. Certificates:

4. Consumer Visits:

six. FAQ:

Q: What’s your principal items?
A:We at the moment produce Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so forth. You can verify the technical specs for previously mentioned motors on our internet site and you can e-mail us to recommend required motors per your specification also.

Q:How to choose a suitable motor?
A:If you have motor pictures or drawings to present us, or you have detailed specs like voltage, pace, torque, motor dimensions, operating mode of the motor, required life time and noise level etc, remember to do not be reluctant to enable us know, then we can advocate ideal motor for every your ask for appropriately.

Q: Do you have customized service for your normal motors?
A:Of course, we can customise for each your ask for for the voltage, speed, torque and shaft measurement/shape. If you need extra wires/cables soldered on the terminal or need to insert connectors, or capacitors or EMC we can make it also.

Q:Do you have specific style service for motors?
A:Indeed, we would like to design motors individually for our consumers, but it could need to have some CZPT cost and design charge. 

Q:Can I have samples for screening first?
A:Yes, certainly you can. Following confirmed the necessary motor specs, we will quotation and offer a proforma bill for samples, once we get the payment, we will get a PASS from our account division to commence samples accordingly.

Q:How do you make sure motor quality?
A:We have our personal inspection methods: for incoming supplies, we have signed sample and drawing to make certain qualified incoming materials for generation approach, we have tour inspection in the approach and ultimate inspection to make positive experienced merchandise before delivery.

Q:What’s your lead time?
A:Typically speaking, our normal standard product will require twenty five-30days, a bit lengthier for tailored merchandise. But we are really versatile on the guide time, it will depends on the specific orders

Q:What’s your payment time period?
A:For all our new buyers, we will want forty% deposite, sixty% paid ahead of cargo.

Q:When will you reply after got my inquiries?
A:We will response inside of 24 hrs once get your inquires.

Q:How can I trust you to make confident my cash is risk-free?
A:We are qualified by the third social gathering SGS and we have exported to above eighty five nations up to June.2017. You can verify our reputation with our present consumers in your nation (if our customers do not thoughts), or you can buy by way of alibaba to get trade assurance from alibaba to make confident your funds is risk-free.

Q:What’s the minimum purchase quantity?
A:Our bare minimum buy quantity relies upon on different motor types, make sure you email us to check out. Also, we generally do not take personal use motor orders. 

Q:What is your transport strategy for motors?
A:For samples and packages significantly less than 100kg, we typically suggest express shipping For heavy deals, we normally propose air shipping or sea shipping. But it all is dependent on our customers’ requirements.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you send me your cost record?
A:Because we have hundreds of diverse merchandise, and price differs per various technical specs, we are not in a position to offer you a price record. But we can estimate inside 24 several hours after received your inquirues to make certain you can get the cost in time.

Q:Can I visit your organization?
A:Yes, welcome to go to our business, but please permit us know at minimum 2 weeks in CZPT to assist us make certain no other meetings throughout the working day you visit us. Many thanks!

Weclome contact with us if have any concerns about this motor or other items!

These compact, lightweight, lower backlash inline equipment reducers were at first designed for encoder applications. They are also suited for a lot of other push techniques. Encoder gear reducers have a really low moment of inertia at the shaft enter and are rated for enter speeds up to 3000 rpm. Two body sizes are accessible with gear ratios from 4.ninety six:1 to 3600:1. Our encoder gearbox sync pads are available from inventory.
When seeking at a reducer vs a gearbox, frequently the only variation is terminology. This is simply because all reducers are gearboxes. Nevertheless, not all gearboxes are retarders. This may seem challenging, but it is in fact really easy. A reducer is a equipment established between the motor and the equipment. The goal of the reducer is to minimize the rotational speed transferred among these two endpoints. The reducer amplifies and multiplies the torque (input) developed by the motor. 2nd, a reducer, as the identify indicates, reduces the pace of the input (output in rpm) so that the output is the right velocity. The phrase “gearbox” is just a generic phrase utilised for the equipment train amongst the motor and the machine. Therefore, all reducers are gearboxes. Nevertheless, not all gearboxes lessen enter velocity. Although unheard of, gearboxes can truly boost enter speeds. By considerably the most frequent type of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.

China high quality 12V 20rpm DC Gear Motor Planetary 36mm Gearbox     with Hot selling